To enhance the wear resistance of PVC tempered film and effectively resist the impact of scratches on use, comprehensive measures need to be taken from multiple dimensions. First of all, in the purchase process, you should choose high-quality PVC tempered film. High-quality PVC tempered film is more stringent in the selection of raw materials. It uses PVC materials with high purity and few impurities. Its molecular structure is tight and uniform, and it has better scratch resistance. At the same time, pay attention to the hardening treatment process on the surface of the film. The tempered film that has been hardened to high standards has significantly improved surface hardness and can withstand the friction of sharper objects without easily leaving scratches. Therefore, when purchasing, you should give priority to products with high hardness grades and well-known brands. Standard operation during installation also affects the wear resistance of the film.
Be sure to thoroughly clean the phone screen before applying the film. Use a dust-free cloth with a special screen cleaner to carefully wipe the screen surface to ensure that there are no dust, gravel and other particles remaining. Once these tiny particles are wrapped between the film and the screen, they will rub the PVC tempered film like sandpaper in daily use, accelerating the generation of scratches. At the same time, when applying the film, avoid touching the adhesive surface of the film with your fingers to prevent fingerprint grease residue from affecting the fit, which will lead to uneven force on the film surface and increase the risk of local wear. Through a standardized and meticulous installation process, a good basis for the use of tempered film can be provided.
Adding an additional protective coating to the PVC tempered film is an effective means to enhance wear resistance. There are special screen protector hardening sprays on the market. These products contain special nanomaterials. After spraying on the surface of the film, a transparent and tough nano coating will be formed. This coating can fill the tiny pores on the surface of the film, making the surface of the film smoother and tighter, and further improving the hardness and wear resistance. When using it, just spray it evenly on the surface of the film according to the product instructions. After it dries and solidifies, it can add an extra layer of protection barrier to the tempered film without affecting the screen display effect.
The development of daily use habits is crucial to protecting PVC tempered film. Avoid placing mobile phones in the same pocket or bag with sharp or hard objects such as keys and coins to prevent these objects from directly contacting the surface of the film and causing scratches. When using a mobile phone, try to keep your fingers clean and avoid long and sharp nails that frequently scratch the film surface. At the same time, reduce the behavior of placing the mobile phone on rough surfaces, such as stone desktops, gravel-covered floors, etc., to prevent the film surface from being damaged by friction with these rough materials. Good usage habits can reduce the wear of tempered film by external factors from the source.
Regularly clean and maintain the pvc tempered film to remove substances that may wear the film surface in time. When cleaning, use a soft dust-free cloth to wipe gently, avoid using rough paper towels or cloth with coarse fibers to prevent the fibers of the cloth itself from scratching the film surface. If there are stubborn stains on the surface of the film, spray a small amount of clean water or a special screen cleaner on the dust-free cloth, then wipe it gently, and wipe the water with a clean dust-free cloth after cleaning. By cleaning regularly and keeping the film surface clean, the wear of the stain particles on the film surface can be effectively reduced, and the service life of the tempered film can be extended.
When slight scratches are found on the surface of the pvc tempered film, timely repair measures can also delay wear. For shallow scratches, you can use a special screen scratch repair paste. Apply the repair paste to the scratched area, and then gently wipe it in a circular motion with a soft cloth. The tiny particles in the repair paste will fill the scratch, making it gradually lighter until it is not obvious. This repair method can restore the smoothness of the film surface to a certain extent and improve the wear resistance of the film. However, if the scratch is deep, it is recommended to replace the new film in time to avoid uneven force at the scratch and accelerate the overall wear of the film surface.
Understanding and following the use characteristics of PVC tempered film is also an important aspect to enhance its wear resistance. Although PVC material has a certain toughness, it is slightly weaker than glass tempered film in high temperature and extreme environment.
Therefore, during use, the mobile phone should be avoided from being exposed to high temperature environment for a long time, such as in a car with direct sunlight, high temperature confined space, etc. High temperature may cause the PVC material to soften and reduce its scratch resistance and wear resistance. At the same time, avoid the mobile phone in an environment with extremely high or low humidity. Extreme humidity changes may affect the structural stability of the film and indirectly affect its wear resistance. Through reasonable use, a good use environment can be created for the PVC tempered film, which helps to maintain its wear resistance.
